Lathes : Manual - KBC Machinery

KING 7x12 Variable Speed Mini Lathe 110V 1PH
[6-125-060]

Electronic variable speed control from 0-2500prm.	Power feed of apron along the bed towards the chuck.	Bed ways are hardened and precision ground.	Clear plastic safety guard automatically shuts lathe off when lifted.
$999.00

KBC 9x18 Belt Drive Bench Lathe with Stand 3/4HP Motor 1PH
[6-335-000]

Complete with threading gearbox.	Belt drive for smooth, quiet operation.	Tray-top cabinet floor stand included!	Hydro approval of electrical system.	4" 3 Jaw Chuck.
$1,675.00

King 10x22 Belt Drive Bench Lathe 110V 1PH
[6-125-061]

Powerful 1HP drive motor.	6 spindle speeds 150-2400 RPM.	Combination inch/metric graduated dials.	Power feed of apron along the bed towards the chuck.	Bed ways are hardened and precision ground.
$1,999.00

KBC 12x36 Precision Toolroom Lathe with Stand 2HP Motor 230V 1PH
[6-660-010]

Floor model complete with cabinet floor stand and rear splash guard.	All gear head, hardened and ground ways.	9 spindle speeds, 70-1400 RPM.	12" swing x 36" between centers.	D1-4 spindle mount, 1-1/2" bore.
$4,250.00

King 14x40 Gearhead Metal Lathe 2HP 220V 1PH
[6-125-062]

Powerful 2HP drive motor wired 220V 1PH.	Gearhead spindle drive with hardened & ground gears.	8 spindle speeds 70-2000 RPM.	Combination inch/metric graduated dials.	4-way power feed of apron and crosslide.
$5,225.00

KBC 13x40 Precision Toolroom Lathe 2HP 230V 1PH Spindle Motor
[6-269-008]

13" swing x 40" between centers.	Floor model with full-length rear guard.	All gear head, hardened and ground ways.	8 spindle speeds, 70-2000 RPM.	D1-4 spindle mount, 1-1/2" bore.
$5,350.00

KBC 14x40 Precision Toolroom Lathe 3HP 230V 3PH Spindle Motor
[6-269-006]

14" swing x 40" between centers.	Floor model with built-in coolant system and rear splash guard.	Hardened and ground gears in headstock, hardened and ground bed ways.	16 spindle speeds, 45-1800 RPM.	D1-4 spindle mount, 1-1/2" bore.
$6,895.00

KBC 14x40 Precision Toolroom Lathe 3HP 575V 3PH Spindle Motor
[6-269-006C]

14" swing x 40" between centers.	Floor model with built-in coolant system and rear splash guard.	Hardened and ground gears in headstock, hardened and ground bed ways.	16 spindle speeds, 45-1800 RPM.	D1-4 spindle mount, 1-1/2" bore.
$6,895.00

KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 230V 1PH
[6-269-007]

14" x 40" capacity.	Heavy-duty 1pc cast iron base.	Runs on 230V single-phase power (no phase converter required).	Satin-chrome dials graduated in inch and metric.	All gear head, hardened & ground ways.
$8,195.00

KBC 16x40 Precision Toolroom Lathe 6HP 230V 3PH Spindle Motor
[6-269-009]

16" swing x 40" between centers.	D1-6 camlock spindle with 3-point bearing support.	Large 2" spindle bore.	16 spindle speed, 45-1800 RPM.	3/6 HP 2-speed motor wired 230V, 3-Phase.
$9,195.00

KBC 16x40 Precision Toolroom Lathe 6HP 575V 3PH Spindle Motor
[6-269-009C]

16" swing x 40" between centers.	D1-6 camlock spindle with 3-point bearing support.	Large 2" spindle bore.	16 spindle speed, 45-1800 RPM.	3/6 HP 2-speed motor wired 575V, 3-Phase.
$9,195.00

KBC 16x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH
[6-201-027]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$13,650.00

KBC 16x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH
[6-201-027C]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$13,650.00

KBC 18x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH
[6-201-029]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$14,695.00

KBC 18x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH
[6-201-029C]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$14,695.00

KBC 18x60 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH
[6-201-030]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$15,995.00

KBC 18x60 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH
[6-201-030C]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$15,995.00

KBC 18x80 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH
[6-201-031]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$16,999.00

KBC 18x80 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH
[6-201-031C]

3-1/8" spindle bore	D1-8 camlock spindle mount.	12 spindle speeds range 42 - 1,800 rpm.	Spindle supported by 2 taper roller bearings and 1 roller bearing	Universal feed gearbox cuts inch and metric threads; no change gears required.
$16,999.00

Kent 14x40 Variable Speed Toolroom Lathe 5HP EVS Motor 230V 1PH or 3PH
[6-273-050]

5HP frequency drive motor runs on 1 phase or 3 phase power.	Hydro approval of electrical system.	Infinetely variable speeds from 20 - 2500 RPM.	Easy to ready digital display for spindle speeds.	One piece cast iron base with front access to chip tray.
$17,995.00

KENT 17x40 High Precision Engine Lathe 7.5HP 3PH
[6-273-064]

7.5 HP main spindle motor, 12 speeds.	D1-6 camlock, 3.125" spindle bore.	Hardened and ground gears and bedways.	Solid one-piece cast iron base.	Inch dials and leadscrews.
$18,895.00

KENT 22x60 Large 4" Bore Engine Lathe 10HP 3PH
[6-273-067]

10 HP main spindle motor, 12 speeds.	D1-8 camlock, 4.12" spindle bore.	Hardened and ground gears and bedways.	Jog button, 4-way rapid traverse.	Mechanical clutch style headstock.
$20,395.00

KENT 22x80 Large 4" Bore Engine Lathe 10HP 3PH
[6-273-068]

10 HP main spindle motor, 12 speeds.	D1-8 camlock, 4.12" spindle bore.	Hardened and ground gears and bedways.	Jog button, 4-way rapid traverse.	Mechanical clutch style headstock.
$21,595.00

KENT 26x120 Large 4" Bore Engine Lathe 10HP 3PH
[6-273-069]

10 HP main spindle motor, 12 speeds.	D1-8 camlock, 4.12" spindle bore.	Hardened and ground gears and bedways.	Jog button, 4-way rapid traverse.	Mechanical clutch style headstock.
$26,495.00

KENT 22x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-054]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$37,595.00

KENT 30x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-051]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$39,795.00

KENT 30x120 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-052]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$45,695.00

KENT 30x160 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH
[6-273-053]

Solid full-length cast iron base.	15 HP Spindle Motor.	12 speeds.	Precision rigid spindle with 3 point support.	Hardened and ground gears and splines.
$53,995.00