Lathes : Manual with DRO - KBC Machinery
KBC 13x40 Precision Toolroom Lathe 2HP Spindle Motor 1PH with Fagor DRO System installed
[6-269-008-F]
[6-269-008-F]
| 13" swing x 40" between centers. | Complete with Fagor DRO system installed. | Floor model with full-length rear guard. | All gear head, hardened and ground ways. | 8 spindle speeds, 70-2000 RPM. |
| $7,395.00 | ||||
KBC 13x40 Precision Toolroom Lathe 2HP 230V 1PH Spindle Motor with Newall DRO System installed
[6-269-008-N]
[6-269-008-N]
| 13" swing x 40" between centers. | Complete with Newall DRO system installed. | Floor model with full-length rear guard. | All gear head, hardened and ground ways. | 8 spindle speeds, 70-2000 RPM. |
| $8,025.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 3PH with Fagor DRO System installed
[6-269-006-F]
[6-269-006-F]
| 14" swing x 40" between centers. | Complete with Fagor DRO system installed. | Floor model with built-in coolant system and rear splash guard. | Hardened and ground gears in headstock, hardened and ground bed ways. | 16 spindle speeds, 45-1800 RPM. |
| $8,895.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 3PH with Fagor DRO System installed
[6-269-006C-F]
[6-269-006C-F]
| 14" swing x 40" between centers. | Complete with Fagor DRO system installed. | Floor model with built-in coolant system and rear splash guard. | Hardened and ground gears in headstock, hardened and ground bed ways. | 16 spindle speeds, 45-1800 RPM. |
| $8,895.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP 230V 3PH Spindle Motor with Newall DRO System installed
[6-269-006-N]
[6-269-006-N]
| 14" swing x 40" between centers. | Complete with Newall DRO system installed. | Floor model with built-in coolant system and rear splash guard. | Hardened and ground gears in headstock, hardened and ground bed ways. | 16 spindle speeds, 45-1800 RPM. |
| $9,525.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP 575V 3PH Spindle Motor with Newall DRO System installed
[6-269-006C-N]
[6-269-006C-N]
| 14" swing x 40" between centers. | Complete with Newall DRO system installed. | Floor model with built-in coolant system and rear splash guard. | Hardened and ground gears in headstock, hardened and ground bed ways. | 16 spindle speeds, 45-1800 RPM. |
| $9,525.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 230V 1PH with Fagor DRO System Installed
[6-269-007-F]
[6-269-007-F]
| 14" x 40" capacity. | Complete with Fagor DRO system installed. | Heavy-duty 1pc cast iron base. | Runs on 230V single-phase power (no phase converter required). | Satin-chrome dials graduated in inch and metric. |
| $9,995.00 | ||||
KBC 14x40 Precision Toolroom Lathe 3HP Spindle Motor 230V 1PH with Newall DRO System Installed
[6-269-007-N]
[6-269-007-N]
| 14" x 40" capacity. | Complete with Newall DRO system installed. | Heavy-duty 1pc cast iron base. | Runs on 230V single-phase power (no phase converter required). | Satin-chrome dials graduated in inch and metric. |
| $10,375.00 | ||||
KBC 16x40 Precision Toolroom Lathe 6HP Spindle Motor 3PH with Fagor DRO System installed
[6-269-009-F]
[6-269-009-F]
| 16" swing x 40" between centers. | Complete with Fagor DRO system installed. | D1-6 camlock spindle with 3-point bearing support. | Large 2" spindle bore. | 16 spindle speed, 45-1800 RPM. |
| $10,875.00 | ||||
KBC 16x40 Precision Toolroom Lathe 6HP 575V 3PH Spindle Motor with Fagor DRO System installed
[6-269-009C-F]
[6-269-009C-F]
| 16" swing x 40" between centers. | Complete with Fagor DRO system installed. | D1-6 camlock spindle with 3-point bearing support. | Large 2" spindle bore. | 16 spindle speed, 45-1800 RPM. |
| $10,875.00 | ||||
KBC 16x40 Precision Toolroom Lathe 6HP 230V 3PH with Newall DRO System installed
[6-269-009-N]
[6-269-009-N]
| 16" swing x 40" between centers. | Complete with Newall DRO system installed. | D1-6 camlock spindle with 3-point bearing support. | Large 2" spindle bore. | 16 spindle speed, 45-1800 RPM. |
| $11,950.00 | ||||
KBC 16x40 Precision Toolroom Lathe 6HP 575V 3PH Spindle Motor with Newall DRO System installed
[6-269-009C-N]
[6-269-009C-N]
| 16" swing x 40" between centers. | Complete with Newall DRO system installed. | D1-6 camlock spindle with 3-point bearing support. | Large 2" spindle bore. | 16 spindle speed, 45-1800 RPM. |
| $11,950.00 | ||||
KBC 16x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH with Newall DRO System installed
[6-201-027-N]
[6-201-027-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $16,650.00 | ||||
KBC 16x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH with Newall DRO System installed
[6-201-027C-N]
[6-201-027C-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $16,650.00 | ||||
KBC 18x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH with Newall DRO System installed
[6-201-029-N]
[6-201-029-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $17,775.00 | ||||
KBC 18x40 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH with Newall DRO System installed
[6-201-029C-N]
[6-201-029C-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $17,775.00 | ||||
KBC 18x60 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH with Newall DRO System installed
[6-201-030-N]
[6-201-030-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $19,450.00 | ||||
KBC 18x60 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH with Newall DRO System installed
[6-201-030C-N]
[6-201-030C-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $19,450.00 | ||||
Kent 14x40 Variable Speed Toolroom Lathe 5HP EVS Motor 230V 1PH or 3PH with Newall DRO System installed
[6-273-050-N]
[6-273-050-N]
| Complete with Newall DRO System installed. | 5HP frequency drive motor runs on 1 phase or 3 phase power. | Hydro approval of electrical system. | Infinetely variable speeds from 20 - 2500 RPM. | Easy to ready digital display for spindle speeds. |
| $20,895.00 | ||||
KBC 18x80 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 230V 3PH with Newall DRO System installed
[6-201-031-N]
[6-201-031-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $20,995.00 | ||||
KBC 18x80 Large 3-1/8" Spindle Bore Lathe 7.5HP Motor 575V 3PH with Newall DRO System installed
[6-201-031C-N]
[6-201-031C-N]
| Complete with Newall DRO system installed | 3-1/8" spindle bore | D1-8 camlock spindle mount. | 12 spindle speeds range 42 - 1,800 rpm. | Spindle supported by 2 taper roller bearings and 1 roller bearing |
| $20,995.00 | ||||
KENT 17x40 High Precision Engine Lathe 7.5HP 3PH with Newall DRO System installed
[6-273-064-N]
[6-273-064-N]
| Complete with Newall DRO System installed. | 7.5 HP main spindle motor, 12 speeds. | D1-6 camlock, 3.125" spindle bore. | Hardened and ground gears and bedways. | Solid one-piece cast iron base. |
| $21,495.00 | ||||
KENT 22x60 Large 4" Bore Engine Lathe 10HP 3PH with Fagor DRO System installed
[6-273-067-F]
[6-273-067-F]
| Complete with Fagor DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $22,550.00 | ||||
KENT 22x60 Large 4" Bore Engine Lathe 10HP 3PH with Newall DRO System installed
[6-273-067-N]
[6-273-067-N]
| Complete with Newall DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $23,395.00 | ||||
KENT 22x80 Large 4" Bore Engine Lathe 10HP 3PH with Fagor DRO System installed
[6-273-068-F]
[6-273-068-F]
| Complete with Fagor DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $24,095.00 | ||||
KENT 22x80 Large 4" Bore Engine Lathe 10HP 3PH with Newall DRO System installed
[6-273-068-N]
[6-273-068-N]
| Complete with Newall DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $25,125.00 | ||||
KENT 26x120 Large 4" Bore Engine Lathe 10HP 3PH with Fagor DRO installed
[6-273-069-F]
[6-273-069-F]
| Complete with Fagor DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $29,725.00 | ||||
KENT 26x120 Large 4" Bore Engine Lathe 10HP 3PH with Newall DRO installed
[6-273-069-N]
[6-273-069-N]
| Complete with Newall DRO system installed. | 10 HP main spindle motor, 12 speeds. | D1-8 camlock, 4.12" spindle bore. | Hardened and ground gears and bedways. | Jog button, 4-way rapid traverse. |
| $31,125.00 | ||||
KENT 22x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-054-N]
[6-273-054-N]
| Complete with Newall DRO System installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $41,595.00 | ||||
KENT 30x80 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-051-N]
[6-273-051-N]
| Complete with Newall DRO system installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $43,995.00 | ||||
KENT 30x120 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-052-N]
[6-273-052-N]
| Complete with Newall DRO system installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $50,495.00 | ||||
KENT 30x160 Heavy Duty 4.1/16" Bore Engine Lathe 15HP Motor 230V 3PH with Newall DRO System installed
[6-273-053-N]
[6-273-053-N]
| Complete with Newall DRO system installed. | Solid full-length cast iron base. | 15 HP Spindle Motor. | 12 speeds. | Precision rigid spindle with 3 point support. |
| $59,795.00 | ||||